Feed aggregator

I have been reading your replays & I must say a lot of people know a great deal about MF tractors but I do have a problem with my MF 165 & maybe you all could help me if your have a little time?
Long story as short as I can, it's a MF165, Serial # 9AI9I42I; it has a GM alternator with the volt regulator under the dash/gauges. When I got this unit it never did charge & the fuel gauge never worked. Just within the past few weeks I took off the hood & replaced & painted a number of sheet metal items & was able to look at the wiring & tank gauge /sending unit better. I checked the alternator & regulator & they tested good, I could not see any damage wires or cut wires, started testing the wires & gauges to see if one is shorted out, but nothing worked. Than I took off the sending unit line to the tank & grounded it to see if the fuel gauge would work & it did not, but when I but a jumper from the battery to fuel gauge it worked, so did the Ammeter & the alternator started charging.
Whatç—´ going on? The fuel gauge only has 2 wires to it one pink one going to the volt regulator & the other going to fuel sending unit.
Could it be I have the wrong regulator on it/? If so do you know what the correct one would be or a name brand & part number of one that would work?
Thanks for you time.
John

$950.00 (0 Bids)End Date: Monday Feb-13-2012 21:18:44 PSTBid now  |  Add to watch list

I have a torn boot on the supersteer stabilizer bar. Has anyone replaced one of these. My question is that there is mounting plate above the bar that has a nut and cotter pin. Do I need to drop that plate or can I just get it done with it in place? If you have done it how hard was it?
Attached Images IMAG0134.jpg (47.7 KB)

Looking at some Chinese made, with I hope American pride all-purpose welders plasma cutters. Any comments would be appreciated. Looking at the forum sponsors for a machine, everlast or longevity ?

I am trying to locate a drive shaft for my HN rototiller or cloth plates for it.

Ok so a question Ive been thinking about...so on the insert for the trailer hitch I have mine dropping but thought about raising it so I don't drag the jack when crossing a dip or high spot.

The question is, does the insert lose any strength when dropped or raised?

I have a 2007 asvrc100,650 hrs. Ac and heat,two speed,tooth bucket, a7000.00 forestry pkg with full protection top,rear protection and lexan windshield which is bullet proof,included is a 2004 loftiness Timberaxe mulcher under 100 hrs. With extra cutting bar and extra set of teeth,also a sosbee grapple and a set of fork lifts,runs great and just put in a new battery,serviced regularly,buy the whole package for 49995.00 call chuck mueller at 770 313 2544 or email me at muellervicki@bellsouth.net located in elberton ga. 30635 can send pics

We got about 8 inches weeks ago....... then nothing! I only plowed once thus far. Hmmm. Anyone else getting any plowing delight?

$145,000.00End Date: Monday Feb-13-2012 20:33:33 PSTBuy It Now for only: US $145,000.00Buy it now  |  Add to watch list

Earlier today, I came across another thread on TBN, where a member talks about the problems they encountered after purchasing a used tractor online, sight unseen. Their thread referred to another thread on another forum which linked to a Youtube video of the tractor prior to purchase. Based on the problems that they encountered I decided to create this thread to highlight the potential dangers of purchasing online.

Please note that for the purposes of this thread the brand and model doesn't matter because it could have been any tractor. At first glance, the tractor in the video below looks fine but if you look closer you may notice that something is wrong, can you spot it?

Kubota B1750 Tractor with Loader - YouTube
Did you spot the problem? I watched the video after reading about the problems the tractor had and didn't see it right away myself. You have to watch very closely. This is a prime example of why one should always evaluate any potential used tractor purchase in person, by test driving it, preferably under actual operating conditions, prior to purchase. Assume nothing, second guess everything, and trust noone.

Here is a link to the other thread on TBN which discusses the ongoing repairs being made to the tractor.

http://www.tractorbynet.com/forums/k...a-rebuild.html

National Post
11 dead after tractor trailer slams into van in Hampstead, Ont.
National Post
The crew of migrant workers had just left a nearby poultry farm. Ms. Rockwood said seven ambulances responded to the crash, along with OPP Perth County police officers and Shakespeare volunteer firefighters. According to Perth County EMS, ...

and more »

Background- I'm a retired Extension agent, had responsibilities in farm safety. For the last 18-20 years we have used a "rollover tractor" as part of our safety demos, primarly with high school ag groups and some farm groups. the old tractor is a Ford 801 workmaster, with a frame to protect the body. We roll it one time with the rollbar, one without, and let everyone see what happens to the "dummy". Very visual, very violent. The problem is the tractor gets rolled 6-12 times/year--for the last 18 years. The poor old tractor is coming apart at the seams. To continue the program we need a "new" tractor". Something similar in size to the 801 seems to work well, we can transport, tow, turn back up right with the research farm equipment. The tractor does not need to run. In fact, we have drained all fluids, removed oil pan and radiator. Located in Ashe County, NC- Jefferson, just north of Boone, on the VA/TN/NC line. If you know of any "junked " tractor of this size that still looks semi-decent that could be donated (Tax deductible) or purchaced at a very reasonable price with in 150-200 miles we would be very interested. I am still involved with the safety days as a volunteer and would probably be the one to retreive the new "victim". Contact Charles_Young@ncsu.edu

We found several piles of scat in our backyard. We have more than a dozen deer that travel through our yard in a week's time, but I always thought deer scat was in pellets?

These seem to be more like dog poo, but then again not so much.

Any one know?
Attached Thumbnails    

$750.00 (0 Bids)End Date: Thursday Feb-16-2012 19:28:47 PSTBuy It Now for only: US $1,200.00Bid now  |  Buy it now  |  Add to watch list

$750.00 (0 Bids)End Date: Thursday Feb-16-2012 19:28:47 PSTBuy It Now for only: US $1,200.00Bid now  |  Buy it now  |  Add to watch list

I have a Ringo Farms 6x10 Dump Trailer and its not dumping. It was working fine. I bought this used in good shape with not alot of use. It has a brand new battery, Electric motor is spinning but nothing happens ? Its a power up, gravity down setup and its full of what appears to be ATF fluid. Its an electric pump with integrated reservoir, Any thoughts ?

Put a Kubota V2203 in a Ford Ranger pickup. Want to over-ride the governor so I can get around 3000 rpm. Tried doubling up the pull spring on the speed lever,,, no luck. tried adjusting the fuel limit screw,,, no luck. How can I get rid of the governor? Anybody?:confused2:

Are there any mahindra volume dealers out there?

I am looking for a comparison for the price of a max 22.

I recently acquired a used Cozy Cab for my 955, but found it was missing the rear supports. I have contacted Cozy Cab, but they no longer make them. Any help locating these is appreciated.

Thanks.

Keith

I recently acquired a used Cozy Cab for my 955, but found it was missing the rear supports. I have contacted Cozy Cab, but they no longer make them. Any help locating these is appreciated.

Thanks.

Keith